Basswood Laserlite Laserply ™ a new ply specially made by Laserply for lower powered machines , 3 graded layers of premium basswood, graded to contain less glue spots and hidden knots, Cuts clean and faster than usual Birch. In tests using 3mm Basswood Laserlite and a K40 30/40W we have had cutting speeds of 35mm per second at 12 -15ma (tests carried out by more than 20 volunteers) or on our Odin 30W 45mm/sec at 60% power The Birch/Basswood/Birch configuration, means good cutting qualities, structurally stronger than light weight poplar ply In our own cutting test using a 100w Thunderlaser we can cut at 80mm/sec at 65% power, it did cut a little faster but 80mm/sec was clean drop out, This is sold as raw material not finished sizes, cutting tolerances apply, it is still a plywood so some warping and twist may occur with different humidities, Sheet cutting is via CNC saw, so the is the chance of splintering edges, this is sold as raw material not finished sized panels 3mm Grade is A/B , Small knots are permissable,this is a natural wood, if you can not accept small or pinhole knots DO NOT BUY from Fully certified sustainable rescources cuts 30mm sec at 50% power on our Thunderbolt, excellent for layering up, decorations, Compatible with Glowforge, Xtool, Aura, Xtool f2, Omtech, Gweike, Beamo,Beambox, all co2 lasers Suitable for Xtool, Glowforge, Beamo, Omtech, Laserscript,Lotus, Mantech, Trotec,Epilog, plus many more co2 and diode machines due to postal issues we have to make this item a 5 sheet minimum purchase so it is rigid enough to go through the mail.
