0.8 is made with Resin Glue so although is laser safe some sooty marks may be apparent on lower powered lasers. This can be easily removed with light sanding using fine paper. For Low power laser you need very slow speed/feed and as much power as you can give, the resin glue dissipates the heat hence it harder to cut than thicker interior Laserply, and most cutting failures are due to incorrectly set machines or wrong speeds and feeds. For ANY advice on the correct setup and tuning of your machine please message us. We are happy to help. Our 1.5 laser grade uses interior grade glue for easier and cleaner co2 laser cutting. These products are for C02 lasers, if you have diode laser it is your decision to purchase. It is your responsibility to check suitability for what you buy. This is a natural product, so manufacturing tolerances apply, 0.8 ply can vary from 0.7 to 1mm due to humidity,
