Description Ultra-Track Pans may be used to collect small spills and leaks OR to capture and channel off significant spills caused by defective equipment or a major overflow. Long work life - estimated to perform 20-30 years. Modular design - center and side pans are 53.5" long; railroad spill containment areas can be easily assembled to any length desired All-polyethylene construction - rugged track pans withstand harsh chemicals and are designed to function in temperatures ranging from -40°F to 140°F. Sealed system - polyethylene (LLDPE) gaskets keep spills from falling between the rails and pans. Below grade piping - all center and side track pans are molded with pipe fitting locators at their lowest point. Below grade piping can be installed to channel large spills to oil/water separators, holding ponds, etc. Low maintenance - unlike carbon steel track pans, Ultra-Track Pans will not rust or corrode. Polyethylene resin is treated with a UV inhibitor, resists degrading effects of the sun. Low cost installation — lightweight track pans can be easily installed without heavy lifting equipment, i.e., forklifts, cranes, backhoes, etc. Minimal tools and labor required. Slip resistant surfaces - pans and grates have been designed with safety in mind. All top surfaces resist slips when wet or oily. System Includes: 1x Bulkhead Fittings 2x Gaskets 1x Grates **Track Pan Rebar Fasteners Sold Separately** Item #: 4130-21 CLICK HERE Dimensions: 53.5" x 27.5" x 6" (1358.9mm x 698.5mm x 152.4mm) Containment Capacity: 19 Gallons (71.9 L) Weight: 58 lbs. (26.3 kg)
