Laser Antifreeze Premixed Coolflow and Distilled Water Pre Mixed 5 LTR

This is a Pre-Mixed cooling solution, 33% coolflow by volume mixed with Pure Distilled Water, 5 Ltr total, if you want other premixed variations, let us know your required level of antifreeze cover ( see chart for temperature ranges) and we will supply it premixed ready to use mixed with Distilled water in 5 ltr containers or larger if required, Please contact us with your requirements  AntiFreeze CoolFlow DTX is miscible with water in all proportions and can protect RAC systems down to -50°C depending on concentration.  Non-Toxic Although based on Ethylene Glycol, CoolFlow DTX has been tested and classified as Non-Toxic by an EPA certified laboratory. Previously Propylene Glycol was the only non-toxic glycol available, that is no longer the case. Hydratech in alliance with Evans Cooling Systems, Inc. have developed and patented the DeTox® additive. DeTox® prevents Ethylene Glycol from being metabolised (during digestion) into toxic by-products, which cause kidney failure, blindness and death. Tests carried out on CoolFlow DTX confirmed the toxicity was “so low that it was impossible to determine an LD50 value”. The DeTox® additive has very little effect on heat transfer or antifreeze performance. In fact similar volumes of CoolFlow DTX or Ethylene Glycol are required to achieve a specific freeze protection. Optimum Flow CoolFlow DTX has improved heat transfer characteristics. Including lower Dynamic Viscosity and higher Thermal Conductivity. For detailed comparison please refer to the Fluid Performancelution. Mixing Guide Frost Protection °C v/v of CoolFlow DTX Refractive Index -10 22% 1.356 -15 28% 1.362 -20 33% 1.367 -25 38% 1.372 -30 42% 1.376 -35 46% 1.380 When measuring the percentage of CoolFlow DTX in the system use a refractometer